Hello, I can't figure out how to set the name of a Content Blocker in the Safari extensions list. So far, the Content Blocker name in this list is the Contaning application name. I tried to set the bundle name in Info.plist and tried to locate Info.plist, without success... Since I also bundle a Safari ("chrome") extension, I have two extensions in the list, and it would be fine to display a specific name for each to make it clear for the user.

I've been having this problem ever since updating my Mac (2024 M3 Macbook Air) to Sequoia where splitscreen basically doesn't work. By "splitscreen," I'm referring to when I hover over the green button in the top left of my browser, go to "full screen", and choose two browsers to see simultaneously. What's happening is that the screens will split, then whichever browser's green button I used will have the tabs stuck in full screen formation. Say I have 5 tabs open on a Chrome browser and I split the screen with finder using the green button on the Chrome browser. The 2 right-most tabs on Chrome will be cut off into oblivion, and only the first 3 will be visible, but if I try to click them, they don't go to the right place. Clicking in the general location of where the 5 tabs SHOULD be in the minimized screen does yield the change of tab, but I can't actually SEE the tabs in their minimized form. I've attached a screenshot because I know it's probably hard to understand what I'm saying. This also doesn't occur 100% of the time, only like 95% of the time. Lol.

I have a working Apple Pay transaction page that works on Safari. But with the new ios 18 update and Apple Pay JS library. I see that a pop up sheet with the scannable code is shown on chrome browser. I tried that. Upon scanning the code with iPhone 15 pro max. The apple pay payment sheet is shown on the phone but with an error Service Unavailable. What do I have to do to make it work? What went wrong? I checked the logs and have no clue of what is failing.

We have a web-based viewer which makes use of device orientation. The permission box only appears on a “touch” and not on a swipe or pinch. Is this normal? We’ve already tried different listeners: start, end etc but it’s still only initiated the permission request upon a physical touch / tap on screen. Any ideas / suggestions would be gratefully received. Many thanks in advance.

Hello, during the development of my website, I discovered that when there are numerous or large WebP images on the screen, the screen keeps flickering, accompanied by the phenomenon of mobile phone heating. The page returns to normal after converting to PNG. It seems that the issue is caused by the update of IOS 18. Could you please assist me in taking a look? PNG (it works) https://static.xdbbtswu.com/bbt_of/assets/test/good/#/ WebP (it doesn't work) https://static.xdbbtswu.com/bbt_of/assets/test/nogood/#/

I have enabled apple pay in my website.. After paying it collect my card details in popup and not showing to proceed the payment.. ![] [Image Edited by Moderator to Remove Personal Information]

crash log: _os_unfair_lock_recursive_abort SIGTRAP BACKGROUND THREAD 29 - CRASHED libsystem_platform.dylib _os_unfair_lock_recursive_abort libsystem_platform.dylib _os_unfair_lock_lock_slow WebKit void IPC::Connection::dispatchToClient<IPC::Connection::enqueueIncomingMessage(***::UniqueRefIPC::Decoder)::$_0>(IPC::Connection::enqueueIncomingMessage(***::UniqueRefIPC::Decoder)::$_0&&) WebKit IPC::Connection::enqueueIncomingMessage(***::UniqueRefIPC::Decoder) WebKit IPC::Connection::processIncomingMessage(***::UniqueRefIPC::Decoder) WebKit ___ZN3IPC10Connection12platformOpenEv_block_invoke libdispatch.dylib _dispatch_client_callout libdispatch.dylib _dispatch_continuation_pop libdispatch.dylib _dispatch_source_latch_and_call libdispatch.dylib _dispatch_source_invoke libdispatch.dylib _dispatch_lane_serial_drain libdispatch.dylib _dispatch_lane_invoke libdispatch.dylib _dispatch_root_queue_drain_deferred_wlh libdispatch.dylib _dispatch_workloop_worker_thread libsystem_pthread.dylib _pthread_wqthread libsystem_pthread.dylib start_wqthread Collapse Note: only crash above iOS 18.0

I got a second-hand have MacBook Pro and sometimes when I run apps the Mac will start popping every 10-30 minutes. I'm not sure if this is something that happens normally because this is an intel MacBook. If someone knows the answer to my question then please respond Thanks!

I'm developing an application that utilizes WKWebView to display a webpage. My goal is to improve the performance and loading speed of this webpage by intercepting specific API calls and providing pre-stored JSON responses directly from within the app, ensuring the webpage renders instantaneously. The challenge I am encountering is the inability to intercept HTTPS URL schemes directly from WKWebView. Any insights or solutions from the community on how to effectively manage and overwrite these particular network requests would be greatly appreciated.

Hi, I had been working on an extension without any issues, running it from Xcode and debugging locally in Safari. However, without making any code changes, and after uninstalling the extension, it stopped appearing in Safari after building for local debugging. Does anyone know what might be happening or how I can clean up the system? Thanks a lot and best regards.

We used declarativeNetRequest.getMatchedRules() to retrieve the blocked URLs. While we do receive a list, we noticed that the URLs captured do not always reflect the ones the content blocker is actively blocking at that moment. However, upon reloading the same page, the correct URLs appear. Screenshots are attached for your reference. First load: After reload:

I'm injecting some javascript into a WKWebview on iOS. At a certain point the web view spits out these warnings into the console and the javascript execution stops. 0x109018c40 - [PID=778] WebProcessProxy::gpuProcessExited: reason=IdleExit 0x109019200 - [PID=779] WebProcessProxy::gpuProcessExited: reason=IdleExit Failed to terminate process: Error Domain=com.apple.extensionKit.errorDomain Code=18 "(null)" UserInfo={NSUnderlyingError=0x303c3c060 {Error Domain=RBSRequestErrorDomain Code=3 "No such process found" UserInfo={NSLocalizedFailureReason=No such process found}}} I can't find any solution for this so am looking if anyone has any idea of what to try. None of the WKWebview delegate functions trigger when this occurs so I can't attempt to reload the webview at this stage

Title: SafariViewService Recurring "Hard Refresh" Issue on iOS 18.0.1 Hello, Many of my app users are experiencing a recurring "hard refresh" issue related to SafariViewService, which appears only on iOS 18.0.1 across various iPhone models. Users on earlier iOS versions are not encountering this problem. Our app relies on SafariViewService, and the logs show an event triggered by an EXC_GUARD exception with a termination reason from LIBXPC, causing the app to stop. Below are key details from the log report: App Version: 4.1.2 (build 4.1.1.0) OS Version: iPhone OS 18.0.1 Exception Type: EXC_GUARD Subtype: GUARD_TYPE_USER Termination Reason: LIBXPC, XPC_EXIT_REASON_FAULT Device Model: iPhone 11 Pro Max Process Path: [Removed] Here’s an excerpt from the logs: ... {"codes":"0x6000000000000007, 0x0000000000000009","reason":9,"message":"namespc 7 reason_code 0x0000000000000009","subtype":"GUARD_TYPE_USER","type":"EXC_GUARD","rawCodes":[Removed],"namespc":7}, "termination" : {"flags":518,"code":9,"namespace":"LIBXPC","indicator":"XPC_EXIT_REASON_FAULT"}, ... I would greatly appreciate any guidance on resolving this issue, particularly if there are known concerns with inter-process communication (LIBXPC) in iOS 18.0.1 or advice on how to manage the EXC_GUARD exception more effectively. Full log details are in the attachment. Thank you for your help! ExcUserFault_SafariViewService-2024-10-10-102717 (1).ips ExcUserFault_OnixWorker.Maui-2024-10-10-102718 (1).ips Thank you for your help!

I am encountering an issue where we are unable to run or launch Safari Driver in our automation tests using macOS. When attempting to run safaridriver -p 8888 from the terminal, we receive the following error message: ERROR: safaridriver could not launch because it is not configured correctly or you need to authenticate. Re-run safaridriver(1) and pass the '--enable' flag to configure and/or authenticate. For more information, consult the safaridriver(1) man page. Despite running sudo safaridriver --enable as an administrator (even as root), the issue persists. I’ve searched through various online forums and GitHub repositories but couldn’t find a working solution. Some references are: Apple Developer Forum Thread: https://forums.developer.apple.com/forums/thread/762321 GitHub Issue: https://github.com/SeleniumHQ/selenium/issues/11381

I’m encountering an issue with CSS not displaying when using WKURLSchemeHandler to load local HTML files. • When I package the app using Xcode 15.3 or above, the CSS styles do not display on iOS 17 or higher. However, on iOS 16.7.1, the CSS displays correctly. • If I use Xcode 15.2 to package the app, the CSS loads and displays correctly on all iOS versions. I am using WKURLSchemeHandler to intercept and load the local HTML files. Is there any known issue or workaround for this? You can now post this in the “Safari & Web” section of the Apple Developer forums for further assistance! // // CustomURLSchemeHandler.m // HTMLTest // // Created by lvxue on 2024/9/23. // // CustomURLSchemeHandler.m #import "CustomURLSchemeHandler.h" @implementation CustomURLSchemeHandler // 拦截请求并提供本地 HTML 文件 - (void)webView:(WKWebView *)webView startURLSchemeTask:(id<WKURLSchemeTask>)urlSchemeTask { NSURL *url = urlSchemeTask.request.URL; //NSString *filePath; // 获取本地 HTML 文件路径 NSString *filePath = [[NSBundle mainBundle] pathForResource:@"index" ofType:@"html" inDirectory:@"LoaclHtml.bundle/A4"]; // 判断请求的是 HTML、CSS 或其他文件 if ([url.lastPathComponent hasSuffix:@".css"]) { filePath = [[NSBundle mainBundle] pathForResource:@"style" ofType:@"css" inDirectory:@"LoaclHtml.bundle/A4/css"]; } else if ([url.lastPathComponent hasSuffix:@".js"]) { filePath = [[NSBundle mainBundle] pathForResource:@"yourJSFileName" ofType:@"js" inDirectory:@"LoaclHtml.bundle/A4/js"]; } // 可以继续添加其他资源类型如图片 NSData *htmlData = [NSData dataWithContentsOfFile:filePath]; NSString *mimeType = [self mimeTypeForPath:filePath]; // 创建响应头 NSURLResponse *response = [[NSURLResponse alloc] initWithURL:url MIMEType:mimeType expectedContentLength:htmlData.length textEncodingName:@"utf-8"]; // 提供响应数据 [urlSchemeTask didReceiveResponse:response]; [urlSchemeTask didReceiveData:htmlData]; [urlSchemeTask didFinish]; } // 停止请求 - (void)webView:(WKWebView *)webView stopURLSchemeTask:(id<WKURLSchemeTask>)urlSchemeTask { // 通常不需要处理停止请求的逻辑 } - (NSString *)mimeTypeForPath:(NSString *)path { NSString *fileExtension = [path pathExtension]; if ([fileExtension isEqualToString:@"html"]) { return @"text/html"; } else if ([fileExtension isEqualToString:@"css"]) { return @"text/css"; } else if ([fileExtension isEqualToString:@"js"]) { return @"application/javascript"; } else if ([fileExtension isEqualToString:@"png"]) { return @"image/png"; } else if ([fileExtension isEqualToString:@"jpg"] || [fileExtension isEqualToString:@"jpeg"]) { return @"image/jpeg"; } else if ([fileExtension isEqualToString:@"gif"]) { return @"image/gif"; } return @"application/octet-stream"; } @end code-block

test

When user opens a new tab and loads a website, the declarativeNetRequest.getMatchedRules() returns nil and on reloading in the same tab it returns the URLs blocked. Is this an expected behaviour?

What do I need to do with my webpages to enable Safari AI summary functionality? Thanks, David

As of Safari 18, the tabs.executeScript extension API no longer respects the frameId option passed to it, and instead just runs the script in the top frame. Try running an extension with the following contents on a page with an iFrame (chase.com puts its login form in an iFrame for example). content.js console.log("content.js loaded", location.href); // tabs.executeScript test browser.runtime.sendMessage({ type: "tabs.executeScript" }).then(() => { console.log("tabs.executeScript done"); }); // scripting.executeScript test browser.runtime.sendMessage({ type: "scripting.executeScript" }).then(() => { console.log("scripting.executeScript done"); }); background.js browser.runtime.onMessage.addListener((request, sender, sendResponse) => { if (request.type === "tabs.executeScript") { browser.tabs .executeScript(sender.tab.id, { code: 'console.log("THIS IS RUN FROM TABS.EXECUTESCRIPT", location.href);', frameId: sender.frameId, }) .then(sendResponse); } else if (request.type === "scripting.executeScript") { browser.scripting .executeScript({ target: { tabId: sender.tab.id, frameIds: [sender.frameId] }, func: () => { console.log("THIS IS RUN FROM SCRIPTING.EXECUTESCRIPT", location.href); }, }) .then(sendResponse); } }); You'll see that tabs.executeScript runs its contents in the TOP frame, no matter what the target is. Notably, scripting.executeScript DOES respect the frameId. Filed with Feedback ID FB15420092

I want to switch from Apns to standard notificationApi browser notification, but when my website originally used Apns, I switched to standard API and called Notification for message notification. The notification didn't appear. I confirmed that Notification.permission is granted.