SimpleApplication.h

/*
     File: SimpleApplication.h
 Abstract: A category of NSApplication where we
 implement all of our application objects properties
 and elements.
  Version: 1.2
 
 Disclaimer: IMPORTANT:  This Apple software is supplied to you by Apple
 Inc. ("Apple") in consideration of your agreement to the following
 terms, and your use, installation, modification or redistribution of
 this Apple software constitutes acceptance of these terms.  If you do
 not agree with these terms, please do not use, install, modify or
 redistribute this Apple software.
 
 In consideration of your agreement to abide by the following terms, and
 subject to these terms, Apple grants you a personal, non-exclusive
 license, under Apple's copyrights in this original Apple software (the
 "Apple Software"), to use, reproduce, modify and redistribute the Apple
 Software, with or without modifications, in source and/or binary forms;
 provided that if you redistribute the Apple Software in its entirety and
 without modifications, you must retain this notice and the following
 text and disclaimers in all such redistributions of the Apple Software.
 Neither the name, trademarks, service marks or logos of Apple Inc. may
 be used to endorse or promote products derived from the Apple Software
 without specific prior written permission from Apple.  Except as
 expressly stated in this notice, no other rights or licenses, express or
 implied, are granted by Apple herein, including but not limited to any
 patent rights that may be infringed by your derivative works or by other
 works in which the Apple Software may be incorporated.
 
 The Apple Software is provided by Apple on an "AS IS" basis.  APPLE
 MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION
 THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS
 FOR A PARTICULAR PURPOSE, REGARDING THE APPLE SOFTWARE OR ITS USE AND
 OPERATION ALONE OR IN COMBINATION WITH YOUR PRODUCTS.
 
 IN NO EVENT SHALL APPLE BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL
 OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 INTERRUPTION) ARISING IN ANY WAY OUT OF THE USE, REPRODUCTION,
 MODIFICATION AND/OR DISTRIBUTION OF THE APPLE SOFTWARE, HOWEVER CAUSED
 AND WHETHER UNDER THEORY OF CONTRACT, TORT (INCLUDING NEGLIGENCE),
 STRICT LIABILITY OR OTHERWISE, EVEN IF APPLE HAS BEEN ADVISED OF THE
 POSSIBILITY OF SUCH DAMAGE.
 
 Copyright (C) 2011 Apple Inc. All Rights Reserved.
 
 */
 
#import <Cocoa/Cocoa.h>
 
@interface NSApplication (SimpleApplication)
 
 
 
 
    /* kvc methods for the 'trinkets' AppleScript element.  Here we implement the methods
    necessary for maintaining the list of trinkets inside of the application container.
    Note the names. In our scripting definition file we specified that the application container
    class contains an element of type 'trinket', like so:
        <element type="trinket"/>
    Cocoa will use the plural form of the class name, 'trinkets',  when naming the
    property used by AppleScript to access the list of buckets, and we should use
    the property name when naming our methods.  So, using the property name, we
    name our methods as follows:
        - (NSArray*) trinkets; (implied by the property declaration)
        -(void) insertInTrinkets:(id) trinket;
        -(void) insertInTrinkets:(id) trinket atIndex:(unsigned)index;
        -(void) removeFromTrinketsAtIndex:(unsigned)index;
    */
 
    /* return the entire list of trinkets */
@property (nonatomic, readonly) NSArray *trinkets;
 
    /* insert a trinket at the beginning of the list */
-(void) insertInTrinkets:(id) trinket;
 
    /* insert a trinket at some position in the list */
-(void) insertInTrinkets:(id) trinket atIndex:(unsigned)index;
 
    /* remove a trinket from the list */
-(void) removeFromTrinketsAtIndex:(unsigned)index;
 
 
 
 
    /* kvc methods for the 'treasures' AppleScript element.  Here we implement the methods
    necessary for maintaining the list of treasures inside of the application container.
    Note the names. In our scripting definition file we specified that the application container
    class contains an element of type 'treasure', like so:
        <element type="treasure"/>
    Cocoa will use the plural form of the class name, 'treasures',  when naming the
    property used by AppleScript to access the list of buckets, and we should use
    the property name when naming our methods.  So, using the property name, we
    name our methods as follows:
        - (NSArray*) treasures; (implied by the property declaration)
        -(void) insertInTreasures:(id) treasure;
        -(void) insertInTreasures:(id) treasure atIndex:(unsigned)index;
        -(void) removeFromTreasuresAtIndex:(unsigned)index;
    */
    
    /* return the entire list of treasures */
@property (nonatomic, readonly) NSArray *treasures;
 
    /* insert a treasure at the beginning of the list */
-(void) insertInTreasures:(id) treasure;
 
    /* insert a treasure at some position in the list */
-(void) insertInTreasures:(id) treasure atIndex:(unsigned)index;
 
    /* remove a treasure from the list */
-(void) removeFromTreasuresAtIndex:(unsigned)index;
 
 
 
 
    /* kvc methods for the 'buckets' AppleScript element.  Here we implement the methods
    necessary for maintaining the list of buckets inside of the application container.
    Note the names. In our scripting definition file we specified that the application container
    class contains an element of type 'bucket', like so:
        <element type="bucket"/>
    Cocoa will use the plural form of the class name when naming the property used by
    AppleScript to access the list of buckets, and we should use the property name
    when naming our methods.  So, using the property name, we name our methods as follows:
        - (NSArray*) buckets; (implied by the property declaration)
        -(void) insertInBuckets:(id) bucket;
        -(void) insertInBuckets:(id) bucket atIndex:(unsigned)index;
        -(void) removeFromBucketsAtIndex:(unsigned)index;
            
    */
    
    /* return the entire list of buckets */
@property (nonatomic, readonly) NSArray *buckets;
 
    /* insert a bucket at the beginning of the list */
-(void) insertInBuckets:(id) bucket;
 
    /* insert a bucket at some position in the list */
-(void) insertInBuckets:(id) bucket atIndex:(unsigned)index;
 
    /* remove a bucket from the list */
-(void) removeFromBucketsAtIndex:(unsigned)index;
 
 
 
    /* kvc methods for the 'strong boxes' AppleScript element.  Here we implement the methods
    necessary for maintaining the list of strong boxes inside of the application container.
    Note the names. In our scripting definition file we specified that the 'strong box'
    class contains an element of type 'strong box', like so:
            <element type="strong box">
                <cocoa key="strongBoxes"/>
            </element>
    But, in our class definition of 'strong box' we have specified an irregular plural form
    for the class name:
        <class name="strong box" plural="strong boxes" code="ScOS" inherits="bucket"
            description="An object that can contain other objects.">
    This makes sense, because simply slapping an 's' on the end of our class name won't
    produce the correct plural form for our class (ie, 'strong boxes') and we would like
    the user to see a proper spelling.
    
    But, now, since we have provided our own plural form, exactly what Cocoa key should
    be used becomes ambiguous.  So, what we have done is explicitly called out the Cocoa
    key we are going to use for our collection of strong boxes inside of our element
    declaration inside of our application class object (see above).   With that in place,
    we can define our accessor methods using the key strongBoxes and normal kvc conventions:
            
    */
    
    /* return the entire list of strong boxes */
@property (nonatomic, readonly) NSArray *strongBoxes;
 
    /* insert a strong box at the beginning of the list */
-(void) insertInStrongBoxes:(id) strongBox;
 
    /* insert a strong box at some position in the list */
-(void) insertInStrongBoxes:(id) strongBox atIndex:(unsigned)index;
 
    /* remove a strong box from the list */
-(void) removeFromStrongBoxesAtIndex:(unsigned)index;
 
 
 
 
    /* since the application object will act as a container for other objects,
    and the objectSpecifier method on all of our objects that our application
    can contain will call the objectSpecifier method on it's container object
    we have provided an objectSpecifier method here.  The method on the application
    container object always returns nil to indicate that it is the root container
    object.   See the description of the objectSpecifier method in Element.h/m
    for more information. */
- (NSScriptObjectSpecifier *)objectSpecifier;
 
 
 
 
    /* kvc Cocoa property for the 'weight' AppleScript property.  Note that rather
    than simply returning a value, this method calculates its result by
    summing the weights of all of the trinkets, treasures, buckets,
    and strong boxes contained in the application.
    
    Also note, 'weight' is a declared as a read only property in our scripting
    definition file so we have defined only a readonly Cocoa property here.  */
@property (nonatomic, readonly) NSNumber *weight;
 
 
 
    /* kvc Cocoa property for the 'value' AppleScript property.  Here also rather
    than simply returning a value, this method calculates its result by
    summing the values of all of the treasures, buckets, and strong boxes
    contained in the application.  And, as with the 'weight' property,
    'value' is a declared as a read only property in our scripting
    definition file so we have defined only a readonly Cocoa property here. */
@property (nonatomic, readonly) NSNumber *value;
 
@end